1. Model XW880(7inch/8inch color LCD)
2. For health care&beautiful industry
3 Independent research and development ability
4. nailfold microcirculation microscope is a noninvasive health diagnostic device
Technical parameters:
Microscope Magnification
≥400 times
Built-in camera pixels
380000 pixels
Light source
LED
Brightness of the light source
≥ 600cd/m2
Stage
X-Y double layer compound mechanical stage
nailfold microcirculation microscope monitor
colar LCD monitor 8inch(4:3)
Input&Output
AC input 100~240V 50/60Hz DC output DC12V,2A
Microscope Package
Aluminum box( Size 34*29*20cm)
How to use the microcirculation microscope?
How to use microcirculation microscope?-Usage of latest medical microcirculation nailfold capillaroscopy machine
1. Fix the screen on the top of the mechanical machines.
2. Plug in the power line and vidao line to the interface of the base.
3. Connect the plug, the plug shows green lights. Press the “Power” button of the screen, wait 3 seconds, the screnn will light.
4. Paint three drops of oil at the position of the intersection of the ring finger nails and skin. Put the oil coated finger in finger hold.
5. Adjuet the coarse hand wheel, when the screen displays images, then adjust fine handwheel. Picture becomes clearer. The bigger one is the coarse adjustable wheel and the small wheel is the fine handwheel. When the machine is about 2-3cm away from the finger, there will be a transparent image on screen.
6. Then, adjuet platform lateral movement handwheel to et a correct position of the first line of the vessel( capillary tube ) and adjuet the fine coarse handwheel to get a clear picture of the vessel. Your fingers will move from left to right on the double loading platform. So try to find the first line of vessels by rotating the platform lateral movement handwheel to change the position of the finger. And finally rotate the fine handwheel ( the position is showed in the structure ) to get a clear picture of the vessels.
7. If there is spot on the screen, rotate the carmera right and left to eliminate it.
microcirculation microscope
microcirculation microscope
microcirculation microscope
How to Maintenance microcirculation microscope
1. Place in a cool, dry, no dust, no acid, no-place.
2. The air relative humidity less than 60%.
3. When moving, before installation if two temperature difference, room temperature should be adapted to the use of the instrument, in order to prevent the optical lens fogging, mildew.
4.The objective has been parity, can not disassemble. Dust on the mirror ball blow hair available, or gently wipe with a clean brush (or lens cleaning paper).
5. The camera target surface is dusty, slightly soiled cotton xylene gently wipe test, turn gently rub outward from the center of the target surface wipe.
6. The objective should be taken to avoid being hit.
7. Keep the instrument surface clean.
How to find the clear first line of capillary in finger nail By microcirculation microscope?
Step 1…Put the cedar oil on the verge of the finger and skin of the ring finger as bellow, put the verge of finger directly under the light source ( If there is no Cedar oil then please use baby oil or olive oil instead )
Step 2. Rotate the coarse handwheel to see the picture as bellow. The bigger one is the coarse adjustable wheel and the small wheel is the fine handwheel
Step 3. Just the X-Y wheel to get a correct position of the first line of the vessel(capillary tube) and then adjust the fine coarse handwheel to get a clear picture of the vessel. Usually we observe the first line of vessels which is large and obvious. So try to find the first line of vessels by rotating the X-Y wheel to change the position of the finger. And finally rotate the fine handwheel (the position in showed on step 2) to get a clear picture of the vessels,blood microcirculation test machine.
Step 4 If. there is spot on the screen, rotate the camera right and left to eliminate it.
